Hardwood Flooring care
Your hardwood floor have fostered and maintained properly. To clean the impurities such as. sand using a vacuum cleaner that has a soft brush, soft broom or cloth. To the input set of high quality mats that prevent entry of sand into the room where the floor. At the feet of furniture paste coasters made of felt - this will prevent the occurrence of scratches.
Do not move furniture by pulling the floor but lift it up and move. If you spill water or other liquid immediately clear. Stains from coffee, red wine or ketchup clear immediately that it would not have left a lasting impact. If you have difficulty removing stubborn stains, consult the dealer flooring.
If the hardwood floors are very dirty you have to clean them up manually using rags. Do not use wet cloth from which the water cap, can damage the parquet (flooring can swell).
Painted surfaces should be cleaned after mounting the cleaning painted surfaces.This tool can be in the form of concentrates that should be dissolved in water (follow instructions), or simply use a cleaner that is spray and should not be dissolved.
The floors above will be well-vacuumed to remove coarse and hard dirt. Then, dampen a soft cloth and clean in both directions. We encourage you to further protect the floor means to care flooring that contains a certain percentage of light. After the first impregnation and use it later (1-2 x per year), this will refresh the paint and cover scratches. Per floor after impregnation do not walk for several hours.
Precise instructions regarding the use of these resources are located on the packaging. In the case of aggressive stains and dirt consult with a counselor regarding the use of different cleaning products that are designed for this purpose.
Be very careful not to use funds that contain wax.
Flooring sure not to clean water.
When the appearance of signs of wear praketu paint, flooring will be re-sanded and painted. Where is easy, but completely removed from the surface of the problems with the renewal of flooring are higher. Grinding and polishing be done by qualified person - parquet.
OILED AREAWhen oiling flooring used oil that highlight the natural look of wood and increase resistance to abrasion, dirt and moisture. Immediately after completing the laying flooring clean cleaner uljenih woodwork (natural of oil is a natural asset, the white of oil white cleaning). This area is protected from dirt and under has the added protection. To achieve real success follow manufacturer's instructions listed on packaging. The floor should first clean up or vacuumed. Then a means dilute with water (follow instructions).
Soft cloth dampened with a solution, apply the product to the floor. From rags water should not drip. For larger areas, use two buckets. In one bucket make a cleaning solution, pour into another bucket of clean water in which to wash cloth. Cloth always first rinse in water and then soak in the cleaner.
After applying the tool should not be further removed with a cloth that is washed in water because it removes the protective coating applied. Allow a few minutes to absorb the floor well and then wipe with a dry cloth in the direction of wood fiber.
Floors should be regularly maintained and later cleaners uljenih area. At the beginning of the procedure should be repeated weekly or as needed, depending on how the loaded, but not less than once a month. After cleaning with cleaning surfaces uljenih your floor will be resistant to dirt and stronger.
After the usual "wet" cleaning deeper stains can be removed with the help of a few drops of concentrated detergent. Concentrate Apply directly on the stain and let it act for 5 minutes. followed by the usual Clean cleaning solution (water + cleanser).
Periodically to refresh the surface of oil to maintain oil uljenih parquet. Areas where the wear layer of oil removed, after treatment with this oil, again getting good looks.Depending on whether it is a white or natural oiled surfaces, use the appropriate oil (natural or white oil).
Before applying the oil must be cleaned. To remove the residues of cleaning materials, clean under intense cleaning. You can then start oiling. Flooring must oiled before it is completely worn, because in that case you will not be able to recover fully.
When temperature is prolonged premises shall be of 16oC to 20oC.
Apply oil on the floor and evenly distribute it through the machine polishing with a suitable pad or manually with a cotton swab. Leave on 10 to 15 minutes. If the surface is not well-soaked repeat. Excess oil removed from the floor with a rag. To oil applied in the right quantity, use spray oil.
After an hour of the polish by hand or machine polishing (150 rpm) with white or red felt. Corners and other hard to reach areas by hand polish. Under you polish long enough under dry. Last polishing must be in the direction of wood fiber.
WARNING: Risk of igniting. Rags soaked with oil by the water immediately after oiling and dry them in the open.
After oiling the floor must be dried for 24 hours and during that time do not step on it.Oil crystallized about a week and during that time when moving furniture. If you wish to additionally protect flooring from dirt after 7 days clean surface cleaner.
Do not use cloths that contain micro-fibers, otherwise your floors can become rough and neotporniji the dirt. Use cloths that are made of natural fibers, such as. cotton cloth.